Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building     

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

新型钢弹簧浮置板道床隔振试验与数值分析研究          下载免费PDF全文

高扬  张强  刘文光  李腾 《世界地震工程》2020,(3):038-47

提出了一种附加位移放大杠杆的新型钢弹簧浮置板道床隔振装置并进行了理论分析，给出了该装置基于位移放大倍数的阻尼力和耗能计算公式。同时设计制作了附加3倍位移放大的新型钢弹簧浮置板道床隔振装置并进行了地铁振动测试，试验结果表明:该装置隔振效果显著。通过建立新型钢弹簧浮置板道床隔振系统有限元分析模型，数值模拟结果与实测振动数据可进行较好的吻合，结果表明:新型钢弹簧浮置板道床隔振系统能有效地减小结构的动力响应。  相似文献   

Inter- and intra-annual trend analysis of water level and flow in the middle and lower reaches of the Ganjiang River,China     

Di Zhu  Yue Ben  Xinfa Xu 《水文科学杂志》2020,65(12):2128-2141

ABSTRACT

The Ganjiang River is the largest tributary of Poyang Lake in China, and its hydrological regime variation greatly affects the utilization of regional water resources and the ecological environment of the lake. In this study, a novel trend analysis method, the Moving Average over Shifting Horizon (MASH), was applied to investigate the inter- and intra-annual trends of flow and water level from 1976 to 2016 at the Xiajiang and the Waizhou hydrological stations in the Ganjiang River. The Significant Change Rate Method (SCRM) was proposed to determine the MASH averaging parameters. The trend analysis results show a statistically significant decrease in water level series throughout the year and the relationship of flow and water level have changed greatly at the Waizhou station. The sediment load reduction, large-scale sand mining and water level decrease of Poyang Lake are identified as the main causes for the water level decrease.  相似文献   

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections     

Ching-Yi Tsai  Keh-Chyuan Tsai  Chao-Hsien Li  Chung-Che Wu  Ker-Chun Lin  Sheng-Jhih Jhuang 《地震工程与结构动力学》2020,49(13):1344-1362

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.  相似文献   

分形岩石裂隙中渗流扩散运动的试验研究     

崔溦  邹旭  李正  江志安  谢武 《岩土力学》2020,41(11):3553-3562

由于存在大量粗糙不规则裂隙，使得岩体中流体运动极为复杂。针对天然粗糙岩石裂隙渗流试验存在物理模型隐蔽性和不可重复性等难点，基于三维Weierstrass-Mandelbrot分形函数构建了粗糙节理面的裂隙通道，采用3D打印技术获得了透明精细的裂隙模型，使用微流体控制仪研究了不同试验条件下的裂隙渗流扩散运动，分析了裂隙通道流量与压力水头、裂隙宽度和分形维数之间的关系。研究结果表明：与平行板立方定律近似，在分形裂隙中，裂隙通道流量与压力水头成线性关系；单宽流量与裂隙通道的宽度成近似的三次方关系；考虑分形维数影响时，相同条件下流过裂隙通道的流量随着分形维数的增加而增加；粗糙裂隙渗流立方定律可采用与分形维数相关的幂指数函数进行修正。  相似文献   

挑坎体型对下游雾化影响的试验研究          下载免费PDF全文

练继建  冉聃颉  何军龄  张紫畅 《水科学进展》2020,31(2):260-269

以解决挑流消能工在泄洪期间为提高消能率而加重下游雾化问题为目标,探究不同体型挑坎的下游雾化特性。通过水力学模型试验,对典型的非对称舌型坎、标准舌型坎、扭面贴坎和连续坎的下游水舌风分布、下游溅水雨强和不同液滴体积分布以及挑流水舌水力特性与冲刷特性进行了研究。研究表明:①各种工况下,非对称舌型坎、标准舌型坎、扭面贴坎的下游水舌风风速均大于连续坎。②对于非对称舌型坎,其溢洪道轴线左侧溅水强度大于右侧,其雨强左右两侧峰值差值最大为5.625 g/(m 2·min);对于扭面贴坎,其溢洪道轴线右侧溅水强度更大,其雨强左右两侧峰值差值最大为45.125 g/(m 2·min)。③随着距离水舌入水点长度增大,大粒径水滴数量和体积占比均剧烈下降;连续坎和舌型坎的挑宽均随着角度的增加而增加;冲坑深度随着角度的减小而增大。④在挑坎合适边墙侧设置扭面贴角能改善下游雾化危害,同时适当增加挑角可以减弱下游冲刷破坏。  相似文献   

基于新型单相MICP技术改性黏性土力学特性的试验研究     

张宽  唐朝生  刘博  张天生  程青  施斌 《工程地质学报》2020,28(2):306-316

微生物诱导碳酸钙沉积(MICP)是一种绿色低碳的新型土体改性技术.该技术当前主要适用于渗透性较好的砂土,普遍使用两相处理方法,即菌液和胶结液分开施用.然而,对于渗透性相对较差的黏性土,传统的两相处理方法难以适用.为此,引入新的单相胶结方法,即菌液和胶结液混合施用,通过调节溶液的初始pH值为细菌水解作用提供窗口期,避免微生物絮凝阻塞孔隙,使混合液均匀分布于土体一定深度范围内,从而达到显著提升胶结效果的目的.利用喷洒法将混合液喷洒至土体表层进行MICP处理,处理完成后使用超微型贯入仪SMP-1测试土体表层不同深度处的结构强度,分析土体力学特性的空间差异,对土体的胶结效果进行定量评价.此外,探究了胶结液浓度(0.2M、0.5M和1.0M)及胶结方法(调节pH与否)对于土体结构强度及MICP改性效果的影响.结果表明:采用单相MICP技术对黏性土进行改性,能够显著提高其结构强度,具有较好的适用性;在不高于1.0 M的胶结液浓度范围内,黏性土的胶结效果随着胶结液浓度增加而提升;相比较而言,调节pH的单相胶结方法对于提升土体胶结的深度和均匀性有明显积极作用.新型单相MICP技术简单易行,能够节约成本,在黏性土表层加固方面具有潜在推广应用价值.  相似文献   

西南某岩溶区地下水系统示踪试验与解析     

张浪  李俊  潘晓东  黄晓荣  彭聪 《中国岩溶》2020,39(1):42-47

以西南某典型岩溶区为例,解析示踪试验在岩溶管道连通性以及获取水文地质参数中的应用。选择落水洞为投放点,分别从落水洞西侧和东侧寻找地下水出露点作为接收点,判别落水洞地下径流的实际去向以及落水洞与接收点之间的水力联系。结合Qtracer2软件对示踪试验成果进行定量解析,确定示踪剂回收率、地下水平均流速、最快流速,估算出岩溶管道结构特征和水文地质参数。结果表明:落水洞与接收点JS01、JS03之间不存在直接水力联系;落水洞与接收点JS02存在水力联系且岩溶管道极为发育,含水介质不均匀,地下水运移路径较为通畅,为典型的紊流流态;落水洞地下径流的主要方向是由西向东,但在丰水期雨量较大期间,接收点JS04能够接收到荧光素钠,说明丰水期水位上涨后两者间会有水力联系,导致部分水量向落水洞西侧排泄。  相似文献   

Fostering Environmental Sensitivity by Observing Everyday Environments     

Minsung Kim 《The Journal of geography》2019,118(4):157-168

This study examined the effects of observing and reflecting on everyday environments in the development of environmental sensitivity, defined as a holistic capability composed of predisposition, knowledge, and behavior subdimensions. We encouraged participants to use diverse sources, such as texts, photographs, and animation, to record their observations and thinking. As a result, the activity in this study was beneficial in enhancing students’ environmental sensitivity. Students’ mean scores on the environmental sensitivity questionnaire improved, and their reflective journals reported increased interest in everyday environments, enhanced knowledge about diverse environmental elements, and strengthened will to act pro-environmentally. The usefulness of the geospatial platform was also reported.  相似文献   

Water quality modeling and sensitivity analysis using Water Quality Analysis Simulation Program (WASP) in the Shenandoah River watershed     

Mbongowo J. Mbuh  Richard Mbih  Comfort Wendi 《自然地理学》2019,40(2):127-148

This study used the Water Quality Analysis Simulation Program (WASP) to simulate nutrients, dissolved oxygen (DO), and chlorophyll-a dynamics in the Shenandoah River basin and performed an uncertainty analysis to examine the complexity of these variables in water quality estimation and their influence on the Shenandoah River. Significant progress has been made; however, nutrient loads emitted into the Shenandoah River from nonpoint sources remain high. Modeling of three points on the Shenandoah River in Virginia and West Virginia provides an ideal case study since the river is classified by the Virginia Department of Environmental Quality as being impaired. The results of a sensitivity test show that model error decreases with increasing model complexity and sensitivity. The model predicted DO values that tended to be close to the measured data, while total nitrogen and phosphorus tended to be overemphasized. Our results examine the importance of temperature, stream flow, and velocity in influencing water quality between seasons and levels on the different sections of the watershed.  相似文献